Up to 7 m² per 100 ml
Coverage depends on the type and severity of contamination.
Professional glass treatment
Professional glass deep-cleaning
inSilico² removes mineral deposits, cement and mortar traces, and stubborn post-construction contamination.
For professional use
For specialist cleaning contractors and rope-access technicians.
SDS and ADR documents
Product sheet, safety data sheet and transport classification.
3.0pH
1.03 g/cm³density
colourlesscolour
non-flammableflammability
A formula for demanding work
When routine cleaning is not enough
inSilico² is intended for restorative deep-cleaning of uncoated glass, including facades after construction work.
The treatment removes etching caused by alkaline substances, dust, mineral and chemical deposits, and residues of mortar, concrete and brick. Available sizes: 200 ml and 500 ml.
Effectively removes
- cement streaks and stains
- calcium carbonate deposits
- dust and mineral deposits
- mortar, concrete and brick residues
Applications
Precision where a clean surface matters
Developed for professional deep-cleaning of glass surfaces.
Glass facades
Removes streaks and deposits caused when rain washes material from grout and concrete.
Post-construction residue
Deep-cleans cement and mortar traces, dust, and alkaline or mineral deposits.
Professional operations
A solution for specialist facade-maintenance and post-construction cleaning teams.
Directions
A controlled four-step process
Read the current safety data sheet and use the required personal protective equipment before starting work.
- 1
Prepare
Work on dry glass. Apply the product to a clean, dry cloth — not directly to the surface.
- 2
Deep-clean
Rub the contaminated area firmly, then repeat after a few seconds.
- 3
Allow to act
Leave the product for approximately one minute while monitoring the work area.
- 4
Rinse
Rinse several times with clean water. Repeat the process if necessary.
Hazardous product — professional use only
Contains hydrofluoric acid. May be corrosive to metals, is toxic if swallowed or in contact with skin, and causes severe skin burns and eye damage. Wear protective gloves, protective clothing, and eye and face protection.
Use restrictions
- use only on glass without coloured or reflective coatings
- do not use on acrylic or Plexiglas
- do not use on stainless-steel components
- do not dilute with water
Technical documentation
Information required before use
Download the source documents retained from the previous website.
Product data sheet (PL)Version 1.0 · 2016
Download PDF
Safety data sheet — SDS (PL)Version 1.0 · 23 March 2016
Download PDF
ADR transport classification (PL)30 March 2016
Download PDF
These documents date from 2016 and are available in Polish. Before purchase or use, obtain the current versions from the manufacturer.
Frequently asked questions
Before you begin
Is inSilico² suitable for routine window cleaning?
It is a professional restorative treatment for stubborn deposits, not a routine window-cleaning liquid.
Which surfaces can be treated?
Only glass without coloured or reflective coatings. Do not use it on acrylic/Plexiglas or stainless steel.
What area can it cover?
According to the product sheet, 100 ml can clean and restore up to 7 m² of glass. Actual coverage depends on contamination.
Is an SDS required before use?
Yes. The product contains hydrofluoric acid and requires professional procedures, suitable protection and current safety documentation.
B2B contact
Tell us about the surface and contamination
We will help assess the application and prepare a quotation.